+- Be Right Back, Uninstalling (https://www.brbuninstalling.com)
+-- Forum: General Category (https://www.brbuninstalling.com/forumdisplay.php?fid=49)
+--- Forum: General Discussion (https://www.brbuninstalling.com/forumdisplay.php?fid=59)
+---- Forum: Cosplay & Conventions (https://www.brbuninstalling.com/forumdisplay.php?fid=62)
+---- Thread: ACEN - Last Call (/showthread.php?tid=12596)
Re: ACEN - Last Call - Greatbacon - 05-17-2011
Quote:Karrde link=topic=5616.msg206810#msg206810 date=1305666375]Had some at lunch, so good ;D
That would be baclava Now I'm hungry.
Re: ACEN - Last Call - backfire - 05-17-2011
Alright, one use of salvaged headphones and a crappy spray paint job later, I'm pretty much set for my outfit. All I'm missing is that backpack...
Which brings me to this, does anyone have something I could use for that or even just a couple pieces of fabric they could toss together to make it? I have a strap I could use, but I don't have any sewing tools/experience to even make even a simple cylinder.
![[Image: frustrated.GIF]](http://dl.dropbox.com/u/99732/stuff/frustrated.GIF){kind=small}
Re: ACEN - Last Call - Live-Free-Or-Pie - 05-17-2011
(05-17-2011, 08:54 PM)backfire link Wrote: Alright, one use of salvaged headphones and a crappy spray paint job later, I'm pretty much set for my outfit. All I'm missing is that backpack...
Which brings me to this, does anyone have something I could use for that or even just a couple pieces of fabric they could toss together to make it? I have a strap I could use, but I don't have any sewing tools/experience to even make even a simple cylinder.
I got you covered, no worries. I'll bring my messenger
Re: ACEN - Last Call - CaffeinePowered - 05-17-2011
(05-17-2011, 08:54 PM)backfire link Wrote: Alright, one use of salvaged headphones and a crappy spray paint job later, I'm pretty much set for my outfit. All I'm missing is that backpack...
Which brings me to this, does anyone have something I could use for that or even just a couple pieces of fabric they could toss together to make it? I have a strap I could use, but I don't have any sewing tools/experience to even make even a simple cylinder.
I emailed everyone back who sent me a phone number, if you didnt get it please let me know....
How to make a cylinder, cut two circles and one large rectangles, use maths to figure out rectangle short side length so that it equals circumference of circles.
Sew circles to ends of rectangle, go all the way around, sew rectangle length wise (almost) all the way across.
Turn inside out, hand sew hole shut.
No I do not have time to do this for you.
![[Image: zBaDO.jpg]](http://i.imgur.com/zBaDO.jpg)
![[Image: Aszz8.jpg]](http://i.imgur.com/Aszz8.jpg)
![[Image: oFCoU.jpg]](http://i.imgur.com/oFCoU.jpg)
![[Image: gBG83]](http://imgur.com/gBG83)
![[Image: ns5hH.jpg]](http://i.imgur.com/ns5hH.jpg)
Oh what else could go wrong, well it all looks like ass for one, dropped the back end of the medigun, broke some plaster off, destroyed my gluegun, ran out of paint twice, covered in paint
Though I may have a solution to the magnet issue, may or may not involve miracles
Re: ACEN - Last Call - at0m - 05-17-2011
ILU caff
Re: ACEN - Last Call - Coelit - 05-17-2011
Focus on his medic stuff if you are still gonna be working on this stuff. I do not need my shortstop to complete my cosplay, that stuff he does need.
Re: ACEN - Last Call - backfire - 05-18-2011
Alrighty then. I got everything all set and I'm all set to forget something incredibly important which'll ruin the entire trip.
Re: ACEN - Last Call - at0m - 05-18-2011
Hyatt just sent me a letter with info about the con, figured it was worth sharing: https://docs.google.com/leaf?id=1_6ZTlwYo7AkI-435CCptTrokx5GWmHEtY9M5wdTJ9Hzbn0H6MAtPMyfsX0TW&hl=en&authkey=CIe-iogO
I'm amused that the logo at the top has three anime characters holding up fingers that say 2 0 0 9, though.
Re: ACEN - Last Call - CaffeinePowered - 05-18-2011
Still looking for conformation on speakers/monitor....
Re: ACEN - Last Call - Coelit - 05-18-2011
(05-18-2011, 07:51 AM)Caffeine link Wrote: Still looking for conformation on speakers/monitor....I will do my best to bring my speakers
Re: ACEN - Last Call - Kirby - 05-18-2011
(05-18-2011, 09:05 AM)Coelit link Wrote: [quote author=Caffeine link=topic=5616.msg206866#msg206866 date=1305723071]I will do my best to bring my speakers
Still looking for conformation on speakers/monitor....
[/quote]
"NEED Y/N"
"MAYBE"
Re: ACEN - Last Call - Coelit - 05-18-2011
(05-18-2011, 01:30 PM)Kirby, the FaNspyPyro link Wrote: [quote author=Coelit link=topic=5616.msg206869#msg206869 date=1305727557]I will do my best to bring my speakers
[quote author=Caffeine link=topic=5616.msg206866#msg206866 date=1305723071]
Still looking for conformation on speakers/monitor....
[/quote]
"NEED Y/N"
"MAYBE"
[/quote]
I do not think you understand. They are not strictly speaking my speakers, as I said... I will try but it is a most likely yes.
Re: ACEN - Last Call - CaffeinePowered - 05-18-2011
(05-18-2011, 01:48 PM)Coelit link Wrote: [quote author=Kirby, the FaNspyPyro link=topic=5616.msg206887#msg206887 date=1305743437]I will do my best to bring my speakers
[quote author=Coelit link=topic=5616.msg206869#msg206869 date=1305727557]
[quote author=Caffeine link=topic=5616.msg206866#msg206866 date=1305723071]
Still looking for conformation on speakers/monitor....
[/quote]
"NEED Y/N"
"MAYBE"
[/quote]
I do not think you understand. They are not strictly speaking my speakers, as I said... I will try but it is a most likely yes.
[/quote]
Zaius has it covered, thanks for the offer :-*
Re: ACEN - Last Call - Dr. Zaius - 05-18-2011
(05-18-2011, 02:11 PM)Caffeine link Wrote: [quote author=Coelit link=topic=5616.msg206890#msg206890 date=1305744510]I will do my best to bring my speakers
[quote author=Kirby, the FaNspyPyro link=topic=5616.msg206887#msg206887 date=1305743437]
[quote author=Coelit link=topic=5616.msg206869#msg206869 date=1305727557]
[quote author=Caffeine link=topic=5616.msg206866#msg206866 date=1305723071]
Still looking for conformation on speakers/monitor....
[/quote]
"NEED Y/N"
"MAYBE"
[/quote]
I do not think you understand. They are not strictly speaking my speakers, as I said... I will try but it is a most likely yes.
[/quote]
Zaius has it covered, thanks for the offer :-*
[/quote]
![[Image: ybdnX.jpg]](http://i.imgur.com/ybdnX.jpg)
Re: ACEN - Last Call - Versus - 05-18-2011
just realized i haven't made a red spy mask to wear over my balaclava
how would i make one
Re: ACEN - Last Call - Greatbacon - 05-18-2011
(05-18-2011, 06:07 PM)Versus-pwny- link Wrote: just realized i haven't made a red spy mask to wear over my balaclavapaper plate and string and markers
how would i make one
Re: ACEN - Last Call - Dr. Zaius - 05-18-2011
(05-18-2011, 06:15 PM)Greatbacon link Wrote: [quote author=Versus-pwny- link=topic=5616.msg206915#msg206915 date=1305760036]paper plate and string and markers
just realized i haven't made a red spy mask to wear over my balaclava
how would i make one
[/quote]
Or you could print something like this off/google image search
![[Image: 3845803814286545_l.jpg]](http://s3-llnw-screenshots.wegame.com/5-3845803814286545/3845803814286545_l.jpg)
Re: ACEN - Last Call - Eightball - 05-18-2011
(05-18-2011, 06:07 PM)Versus-pwny- link Wrote: just realized i haven't made a red spy mask to wear over my balaclavaI've made them in the past by cracking open GMOD, getting a good screenshot of a facial expression, and printing it out on simple 8x11 paper. Then, get some cardboard (if you don't have that, any sturdy paper will do--I used the front of a manila envelope) for backing, and tape/gently glue the face onto it and get some simple elastic to hold it to your face.
how would i make one
Re: ACEN - Last Call - Bonesinger - 05-18-2011
(05-18-2011, 06:48 PM)Eightball link Wrote: [quote author=Versus-pwny- link=topic=5616.msg206915#msg206915 date=1305760036]I've made them in the past by cracking open GMOD, getting a good screenshot of a facial expression, and printing it out on simple 8x11 paper. Then, get some cardboard (if you don't have that, any sturdy paper will do--I used the front of a manila envelope) for backing, and tape/gently glue the face onto it and get some simple elastic to hold it to your face.
just realized i haven't made a red spy mask to wear over my balaclava
how would i make one
[/quote]
This. You could also just print it out on some thicker 8x11 piece of cardstock paper. It should be sturdy yet still flexible.
Re: ACEN - Last Call - Versus - 05-18-2011
ok cool