More computer problems.. - Printable Version +- Be Right Back, Uninstalling (https://www.brbuninstalling.com) +-- Forum: Technology (https://www.brbuninstalling.com/forumdisplay.php?fid=51) +--- Forum: Computers (https://www.brbuninstalling.com/forumdisplay.php?fid=69) +--- Thread: More computer problems.. (/showthread.php?tid=13175) |
More computer problems.. - zaneyard - 02-04-2012 New graphics card, fresh windows install. Still getting bsods. Run a few chkdsk to maybe see if i have a corrupt drive. No problems detected there. Decide to do memtest overnight It was up to 92000 errors when I was done pouring my cereal. Now, is it likely only one stick or is there no way to know from here? Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - k0ala - 02-04-2012 Run memtest on a single stick in the motherboard Shutdown, swap out, memtest some more, repeat 4x Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - zaneyard - 02-04-2012 (02-04-2012, 10:55 AM)k0ala link Wrote: Run memtest on a single stick in the motherboardi decided to change some timings and voltages in my bios my system seems to be running more stable than it was before. I'll run another overnight memtest tonight with the new settings otherwise i'll test each individual one and then get gskill to replace it. Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - Kirby - 02-04-2012 Told you so. Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - zaneyard - 02-04-2012 it's actually running really well after i set the timings and voltages back to what they used to be it must have reset at one point in time Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - Kirby - 02-05-2012 Wait did you have them tweaked or did the board not set them to the SPD values? Re: I THINK I FOUND OUT WHAT WAS WRONG WITH MY COMPUTER - zaneyard - 02-05-2012 i'm 100 percent sure i set the timings and voltages correctly when i built the computer when i went to go look yesterday it was set to auto maybe my cr2032 is dead on my mobo and my bios reset at one point in time. but anyways, i ran a memtest overnight with the new settings; no errors at all. Re: More computer problems.. - zaneyard - 02-09-2012 and after a few days of stability, system service exception blue screen again... guess i'm going to run a 20 hour memtest because i'm getting fucking frustrated with this box. i thought it was fixed but now it's all messed up again. Maybe i should just give asus a call or something this weekend. Edit, tweaked nb voltage a little. Maybe that will help. Gskill forums mentioned bumping up nb voltage by a tenth of a volt if there is problems with system stability with 1600 ram. Question: does it really matter if my memory isn't on the certified vendor list for the motherboard and vice versa? Re: More computer problems.. - Didzo - 02-09-2012 (02-09-2012, 09:00 PM)zaneyard link Wrote: Question: does it really matter if my memory isn't on the certified vendor list for the motherboard and vice versa? My guess is probably yes. :-X Re: More computer problems.. - at0m - 02-09-2012 (02-09-2012, 11:31 PM)Didzo link Wrote: [quote author=zaneyard link=topic=6236.msg238868#msg238868 date=1328839237] My guess is probably yes. :-X [/quote]Usually RAM's RAM. Re: More computer problems.. - zaneyard - 02-10-2012 (02-09-2012, 11:34 PM)at0m link Wrote: [quote author=Didzo link=topic=6236.msg238882#msg238882 date=1328848268] My guess is probably yes. :-X [/quote]Usually RAM's RAM. [/quote] yeah that's what I thought. At least I think I'm on the right track with modifying the NB voltage. Feel pretty stupid that this might have been the problem the whole time. Re: More computer problems.. - HeK - 02-10-2012 (02-09-2012, 11:34 PM)at0m link Wrote: [quote author=Didzo link=topic=6236.msg238882#msg238882 date=1328848268] My guess is probably yes. :-X [/quote]Usually RAM's RAM. [/quote] Not really, timings and voltages differ between vendors, even component suppliers. If you do encounter compatibility issues (and I have in the past) support may be limited unless you are using supported parts. Re: More computer problems.. - zaneyard - 02-10-2012 (02-10-2012, 09:03 AM)HeK link Wrote: [quote author=at0m link=topic=6236.msg238883#msg238883 date=1328848477] My guess is probably yes. :-X [/quote]Usually RAM's RAM. [/quote] Not really, timings and voltages differ between vendors, even component suppliers. If you do encounter compatibility issues (and I have in the past) support may be limited unless you are using supported parts. [/quote] I'll take that into consideration in the future, especially during future builds. Re: More computer problems.. - Kirby - 02-10-2012 (02-10-2012, 09:05 AM)zaneyard link Wrote: [quote author=HeK link=topic=6236.msg238902#msg238902 date=1328882607] My guess is probably yes. :-X [/quote]Usually RAM's RAM. [/quote] Not really, timings and voltages differ between vendors, even component suppliers. If you do encounter compatibility issues (and I have in the past) support may be limited unless you are using supported parts. [/quote] I'll take that into consideration in the future, especially during future builds. [/quote] I had an issue on my old P4 build where I mixed RAM from Corsair and Crucial, they had the same stock clock speeds, same capacity and I even went so far as to ensure they had the same amount of memory chips with the same capacity over each chip as each other, but it would eventually crash in games unless I was only running one of the brands. I eventually replaced the Crucial sticks with a pair of matching Corsair sticks, and that build proceeded to be rock solid for like 6 years until I replaced it with my current AMD build. Then it was my pFSense box until I built a new one of those too. |