Duck, Duck, Goose Guest |
07-13-2010, 10:28 AM
Since the Engy update, I've been getting a really shitty frame rate (40).
I set everything to low and still 40 fps. Windows 7 Home Premium x64 Intel Core 2 Quad Q9000 (2.0GHz) 4096MB 1066MHz DDR3 Dual Channel Memory (2 sticks) Nvidia GTX 260M (1GB) Why is TF2 being a bitch?
(This post was last modified: 07-13-2010, 11:50 AM by Nitrous Oxide.)
|
||
|
CaffeinePowered Mad Hatter Posts: 12,998 Joined: Mar 2008 |
07-13-2010, 10:32 AM
Mine got better....what sort of video settings do you have on? AA, MNSA, etc.
 Sig by Joel |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 10:35 AM
(07-13-2010, 10:32 AM)Caffeine link Wrote: Mine got better....what sort of video settings do you have on? AA, MNSA, etc.I had most things at moderate-high, set everything to the lowest and still had 40 fps. Usually I run Trilinear, 4x AA, High models, very high textures, multi-core rendering, motion blur, etc. at 80+ fps. |
||
|
copulatingduck Following in Gordon's Footsteps Posts: 7,518 Joined: Apr 2008 |
07-13-2010, 10:40 AM
raped
Ripped like paper raped with ease hey scrub nerd pyros suck on these |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 10:41 AM
|
||
|
CaffeinePowered Mad Hatter Posts: 12,998 Joined: Mar 2008 |
07-13-2010, 10:44 AM
I would say try playing with that stuff off and just see what it does. I keep these things on low generally since things like AA will rape FPS much more quickly than using higher quality models and textures.
For example 16x AA literally means that it goes over each frame 16 times smoothing things out before it draws it to the screen. Â Sig by Joel |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 10:47 AM
Yeah, but I threw it down to no anti-aliasing and the lowest setting for everything else, didn't make a difference... ???
|
||
|
CaffeinePowered Mad Hatter Posts: 12,998 Joined: Mar 2008 |
07-13-2010, 10:49 AM
(07-13-2010, 10:47 AM)Nitrous Oxide link Wrote: Yeah, but I threw it down to no anti-aliasing and the lowest setting for everything else, didn't make a difference... ??? Make sure all of your drivers are up to date, and not just video  Sig by Joel |
||
|
copulatingduck Following in Gordon's Footsteps Posts: 7,518 Joined: Apr 2008 |
07-13-2010, 11:05 AM
try defragging using gcfscape, or bite the bullet and install an fps-config. That and keep an eye on temps while you play, see if anything gets ridiculously hot. If I'm not mistaken, that's a mobile card in which case I wouldn't be the least bit surprised if you're dealing with heat-damage at this point, especially if you're on a dell. That said, 2GHz is pretty shitty to be trying to run TF2, your graphics card isn't gonna mean shit compared to your processor (that's why adjusting graphics settings isn't doing squat) in source games, I'm surprised you ever got over 80fps
Ripped like paper raped with ease hey scrub nerd pyros suck on these |
||
|
Vlambo BRB, Posting Posts: 1,175 Joined: Nov 2008 |
07-13-2010, 11:25 AM
Aye, I was having FPS issues, and after doing some research, found out it was my CPU overheating. I just replaced the thermal paste, and it fixed my FPS and overheating issues.
|
||
|
Versus My fursona is a blops attack dog Posts: 10,103 Joined: Mar 2008 |
07-13-2010, 11:29 AM
(07-13-2010, 11:05 AM)Duck link Wrote: That said, 2GHz is pretty shitty to be trying to run TF2, your graphics card isn't gonna mean shit compared to your processor (that's why adjusting graphics settings isn't doing squat) in source games, I'm surprised you ever got over 80fps this, how the fuck did you get 80+ fps with a 2ghz dualcore |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 11:45 AM
Wait... I have a quad core. What the fuck did I copy paste... :-\
Stupid Gateway website... this is my computer: http://forum.notebookreview.com/gateway-...eries.html Duck, I've been checking the CPU temp recently, one of the cores gets to about 86°C max. Not sure about my GPU temp, does nvidia have an app for that? Yeah Vlambo, I think it might be my paste, but I don't know where to buy some/what kinds are good/how to apply it without fucking up.
(This post was last modified: 07-13-2010, 11:49 AM by Nitrous Oxide.)
|
||
|
Vandamguy Guest |
07-13-2010, 11:51 AM
(07-13-2010, 11:45 AM)Nitrous Oxide link Wrote: 86°C max.dats bad. http://www.almico.com/speedfan440.exe should be ~50 |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 11:57 AM
Uhhhhhhh...
I guess it's the thermal paste. Where do I buy some? Also I read somewhere it's safe to have your CPU at 20 degrees below the shut off temp (mine is 105)... just guessing it isn't normal... but my laptop has always been running really hot.
(This post was last modified: 07-13-2010, 12:01 PM by Nitrous Oxide.)
|
||
|
CaffeinePowered Mad Hatter Posts: 12,998 Joined: Mar 2008 |
07-13-2010, 12:09 PM
(07-13-2010, 11:51 AM)Vandamguy link Wrote: [quote author=Nitrous Oxide link=topic=4795.msg163578#msg163578 date=1279039506]dats bad. http://www.almico.com/speedfan440.exe should be ~50 [/quote] I'm surprised your CPU still works at all, I freak out if I go above 45 C Â Sig by Joel |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 12:14 PM
So I found a store that sells Arctic Silver 5, so I'll go grab some of that.
Is putting it on really easy? And I know to clean the existing paste to use 99% Isopropyl Alcohol (sweet, I can clean my bong, my bearings AND my CPU with the same stuff).
(This post was last modified: 07-13-2010, 12:15 PM by Nitrous Oxide.)
|
||
|
Kor Crits = Skill Posts: 1,654 Joined: Mar 2008 |
07-13-2010, 12:31 PM
(07-13-2010, 12:14 PM)Nitrous Oxide link Wrote: Is putting it on really easy? Having watched my Bro do mount a dozen cpu's or so, the quick and dirty advice is don't miss, but ensure full coverage. Great spirits have always found violent opposition from mediocrities. The latter cannot understand it when a man does not thoughtlessly submit to hereditary prejudices but honestly and courageously uses his intelligence. -Albert Einstein |
||
|
Duck, Duck, Goose Guest |
07-13-2010, 12:37 PM
Alright, well I'm picking it up in 3 and a half hours, hopefully that fixes my framerate.
|
||
|
CaffeinePowered Mad Hatter Posts: 12,998 Joined: Mar 2008 |
07-13-2010, 01:10 PM
Go and watch some videos, make sure you clean the processor and heat sink with rubbing alcohol before applying new paste
 Sig by Joel |
||
|
Vlambo BRB, Posting Posts: 1,175 Joined: Nov 2008 |
07-13-2010, 01:11 PM
wait, its a laptop? Oh well, fuck, I have no idea
|
||
|
|