Hello There, Guest! Register

Computer problem.
exanimo
Guest

 
#1
06-19-2008, 01:43 PM

So, I've been having this problem recently where I'd turn on my computer, it would do a funny beep, start normally, but there would be no picture.  In order to fix this I need to unplug everything, reinsert the memory and it would work peachy.  Then today it acts up again, so I do my normal routine, but this time there was no weird beep, but there was still no picture. Unplug everything take out the graphics card and reinsert it, then it works.  But while loading windows the whole computer just shuts down now.

What do you think is the problem? Overheating processor? Motherboard? Graphics card? Memory?
Reply
ZoSo
Lurker


Posts: 107
Joined: May 2008
#2
06-19-2008, 01:51 PM

Are you monitoring your temps?

Also have you searched for updated Drivers/BIOS?

Download Speed Fan and RivaTuner if you haven't already to monitor your temps and let us know what they are.


Dream It. Weld It.          "You can't ride the tiger forever"


eVGA 8800 GTS 512mb @ 864/2106/2000 (1.38V)
Thermalright HR-03 Rev A & SI-97 + Antec 900
BenQ FP241W @ 1920x1200 (24" WUXGA LCD)
AMD X2 4200+ @ 2.7ghz (1.55V)
OCZ Platinum DDR400 2-3-2-5 4x1Gb
ASRock Dual SATA-II (Volt-Modded)
Auzentech X-Fi Prelude + Logitech Z-5300e
Seagate 180Gb SATA-II + 320Gb External
Cooler Master Real Power 550W
Vista Business x64 w/ SP1
Logitech G15, G25, MX518
Reply
Mission Difficult
BRB, Posting


Posts: 1,771
Joined: Mar 2008
#3
06-19-2008, 01:54 PM

Also check your psu.


Reply
Surf314
Seriously, this week I'll play PS
******

Posts: 12,078
Joined: Mar 2008
#4
06-19-2008, 01:59 PM

Did you open your ports?

Sorry wrong thread.


[Image: samjackson-4.png]
Reply
Vandamguy
Guest

 
#5
06-19-2008, 05:47 PM

nice dick

no more bios beep leans me towards bad mobo, or bad ram.
Reply
rumsfald
Guest

 
#6
06-19-2008, 06:28 PM

(06-19-2008, 01:54 PM)Mission Difficult link Wrote: Also check your psu.

seconded.  My guess this is the initial problem that, if left unchecked, could also cause the failures Vandam suggests.

I had very similar symptoms a few years back, and I usually hit the reset buTTON and things worked.  what was happening was the PSU was just at/near overloaded, and when I hit reset it warm-booted (which it could handle easier then a cold-boot).  The cause was I had swapped out NICs, and the replacement nic had a slightly higher power draw, which pushed things over the limit.

If you added any components lately, try removing/unplugging them and see if that works (I wound up uninstalling the second cd drive).  Though, it could have already caused a short which could have burnt mobo or ram as VaDam suggests.
Reply
exanimo
Guest

 
#7
06-19-2008, 11:53 PM

I found the problem. When starting my PC it would shut down at random times.  I looked up these kinds of problems online.  Says it could be overheating.  I quickly booted into the BIOs and checked my temp to check. Sure enough, the damn processor is at 85 degrees centigrade.  So I took off my heatsink, cleaned it, re-greased it and it worked.  My four cores are currently at 60 degrees. The stock Intel heatsinks are complete shit, it must be said. So I ordered myself another heatsink so I don't have to go through this shit again. Thanks guys <3.
Reply
Vandamguy
Guest

 
#8
06-20-2008, 12:09 AM

havnt had a problem with my stock intel and its been running a year and a half.

except for the fact its fucking loud. (65nm)
Reply
ZoSo
Lurker


Posts: 107
Joined: May 2008
#9
06-20-2008, 10:09 AM

(06-19-2008, 11:53 PM)exanimo link Wrote: I found the problem. When starting my PC it would shut down at random times.  I looked up these kinds of problems online.  Says it could be overheating.  I quickly booted into the BIOs and checked my temp to check. Sure enough, the damn processor is at 85 degrees centigrade.  So I took off my heatsink, cleaned it, re-greased it and it worked.  My four cores are currently at 60 degrees. The stock Intel heatsinks are complete shit, it must be said. So I ordered myself another heatsink so I don't have to go through this shit again. Thanks guys <3.

Yea, definitely sounds like a temp problem.  Let us know if you have any troubles after installing your new HS.


Dream It. Weld It.          "You can't ride the tiger forever"


eVGA 8800 GTS 512mb @ 864/2106/2000 (1.38V)
Thermalright HR-03 Rev A & SI-97 + Antec 900
BenQ FP241W @ 1920x1200 (24" WUXGA LCD)
AMD X2 4200+ @ 2.7ghz (1.55V)
OCZ Platinum DDR400 2-3-2-5 4x1Gb
ASRock Dual SATA-II (Volt-Modded)
Auzentech X-Fi Prelude + Logitech Z-5300e
Seagate 180Gb SATA-II + 320Gb External
Cooler Master Real Power 550W
Vista Business x64 w/ SP1
Logitech G15, G25, MX518
Reply
ToiletDuck
BRB, Posting


Posts: 921
Joined: Apr 2008
#10
06-20-2008, 10:51 AM

(06-19-2008, 11:53 PM)exanimo link Wrote: I found the problem. When starting my PC it would shut down at random times.  I looked up these kinds of problems online.  Says it could be overheating.  I quickly booted into the BIOs and checked my temp to check. Sure enough, the damn processor is at 85 degrees centigrade.  So I took off my heatsink, cleaned it, re-greased it and it worked.  My four cores are currently at 60 degrees. The stock Intel heatsinks are complete shit, it must be said. So I ordered myself another heatsink so I don't have to go through this shit again. Thanks guys <3.

pewps, i run a scythe ninja rev. b on my quaddy and it runs at 21 degrees celcius idle, loveit! then again it's in a less-than-room-temperature room as well.


[Image: vhs51j.gif]
[Image: rrmvpd.gif]
[Image: 5wfajm.gif]
[Image: 33cmd7m.gif]
[Image: s3g8xs.gif]
[Image: 2dmbam1.gif]
[Image: 1e5tuv.gif]
[Image: 1fzo94.jpg]
Reply
ZoSo
Lurker


Posts: 107
Joined: May 2008
#11
06-20-2008, 11:04 AM

A good case can make a huge difference in your temps.

For example look at my clock speeds and volt-mods, my GPU idles at 38C and loads at 45C,  my CPU idles at 29C and loads at 38C.


Dream It. Weld It.          "You can't ride the tiger forever"


eVGA 8800 GTS 512mb @ 864/2106/2000 (1.38V)
Thermalright HR-03 Rev A & SI-97 + Antec 900
BenQ FP241W @ 1920x1200 (24" WUXGA LCD)
AMD X2 4200+ @ 2.7ghz (1.55V)
OCZ Platinum DDR400 2-3-2-5 4x1Gb
ASRock Dual SATA-II (Volt-Modded)
Auzentech X-Fi Prelude + Logitech Z-5300e
Seagate 180Gb SATA-II + 320Gb External
Cooler Master Real Power 550W
Vista Business x64 w/ SP1
Logitech G15, G25, MX518
Reply
exanimo
Guest

 
#12
06-20-2008, 12:50 PM

I don't think it's my case;
[Image: 11-103-019-02.jpg]
I've been having problems with my heatsink since day one I built the PC. I ordered this:
[Image: 35-101-011-02.jpg]
Reply
ToiletDuck
BRB, Posting


Posts: 921
Joined: Apr 2008
#13
06-20-2008, 12:52 PM

that's a cutie. nd.

which one is that?  ??? ??? 8) :o Sad


[Image: vhs51j.gif]
[Image: rrmvpd.gif]
[Image: 5wfajm.gif]
[Image: 33cmd7m.gif]
[Image: s3g8xs.gif]
[Image: 2dmbam1.gif]
[Image: 1e5tuv.gif]
[Image: 1fzo94.jpg]
Reply
Geoff
Real World Azn


Posts: 3,921
Joined: Apr 2008
#14
06-20-2008, 04:55 PM

(06-20-2008, 12:50 PM)exanimo link Wrote: I don't think it's my case;
[Image: 11-103-019-02.jpg]
I've been having problems with my heatsink since day one I built the PC. I ordered this:
[Image: 35-101-011-02.jpg]

:O I WANT THAT CASE


(10-06-2011, 04:24 AM)Vandamguy link Wrote:just ignore everything Geoff posts its always trolling or ignorant drivel
Reply
Vandamguy
Guest

 
#15
06-20-2008, 05:40 PM

i hate heatsinks that require you to install a back plate  >Sad
Reply
ToiletDuck
BRB, Posting


Posts: 921
Joined: Apr 2008
#16
06-20-2008, 10:31 PM

(06-20-2008, 05:40 PM)Vandamguy link Wrote: i hate heatsinks that require you to install a back plate  >Sad

psh, don't be such a pussy


[Image: vhs51j.gif]
[Image: rrmvpd.gif]
[Image: 5wfajm.gif]
[Image: 33cmd7m.gif]
[Image: s3g8xs.gif]
[Image: 2dmbam1.gif]
[Image: 1e5tuv.gif]
[Image: 1fzo94.jpg]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)