Hello There, Guest! Register

Setting up a LAN with a Switch
Eschatos
Jack Thompson Fan Club Member


Posts: 4,447
Joined: Mar 2008
#1
10-01-2011, 01:12 AM

So surprisingly I have been called upon to setup a LAN for gaming for the first time.  I bought a switch from Newegg and then discovered that setting up a LAN is not as simple as just plugging all the computers into the switch.  After following dozens of shitty guides I've tried everything from setting up static IPs to enabling network sharing, all with no success in actually setting up a network.  For anyone with the knowledge: please explain how to set this shit up or link to a guide that actually works. 

tl;dr:  Eschatos is a moron and can't set up his own network.



Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#2
10-01-2011, 02:02 AM

you literally plug each computer into a port on the switch.
you still need a router. which likely has a dhcp server that you can use to assign addresses.
if you're getting ip address conflicts go into cmd and type in ipconfig -release and ipconfig -renew

if you want more help you really need to tell us what you need because "IT BROK HOW I FIX" isn't going to cut it.

honestly this is as easy as jungling with ww you can't fail at that.


or can you?




i love you eschatos have my children.


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
(This post was last modified: 10-01-2011, 02:06 AM by zaneyard.)
Reply
Kirby
Uninstalling
***

Posts: 3,853
Joined: Jun 2009
#3
10-01-2011, 07:44 AM

If LAN has internet access, set up modem and router like you normally would, plug no computers into the router, run cable from router port one to the uplink port on the switch (Which will probably use the same hardware inside the switch as it's highest #'ed port, so you can't use that port)


Plug every computer into switch.


Be happy.


[Image: fastdlusage.png]


[Image: b_350_20_5A6C3E_383F2D_D2E1B5_2E3226.png]
[Image: b_350_20_FFAD41_E98100_000000_591F11.png]
[Image: b_350_20_692108_381007_FFFFFF_000000.png]

[Image: b_350_20_323957_202743_F19A15_111111.png]

[Image: amd.jpg]
[Image: radeon.jpg]
[Image: win7.jpg]
[Image: ubuntu.jpg]
[Image: xp.jpg]
[Image: chrome.jpg]
[Image: pyro.jpg]
Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#4
10-01-2011, 09:24 AM

Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.
(This post was last modified: 10-01-2011, 09:26 AM by HeK.)
Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#5
10-01-2011, 12:21 PM

(10-01-2011, 09:24 AM)HeK link Wrote: Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.
yeah most workgroup switches now have auto sensing i don't remember the last time i've had to use a crossover


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
Eschatos
Jack Thompson Fan Club Member


Posts: 4,447
Joined: Mar 2008
#6
10-01-2011, 12:51 PM

(10-01-2011, 09:24 AM)HeK link Wrote: Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.



(This post was last modified: 10-01-2011, 12:53 PM by Eschatos.)
Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#7
10-01-2011, 01:17 PM

(10-01-2011, 12:51 PM)Eschatos link Wrote: [quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.
[/quote]
you need a device to hand out ip addresses unless you want to do that for each device itself


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
Eschatos
Jack Thompson Fan Club Member


Posts: 4,447
Joined: Mar 2008
#8
10-01-2011, 03:29 PM

(10-01-2011, 01:17 PM)zaneyard link Wrote: [quote author=Eschatos link=topic=5993.msg224935#msg224935 date=1317491478]
[quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.
[/quote]
you need a device to hand out ip addresses unless you want to do that for each device itself
[/quote]

Ok, how would I do that for each device itself?



Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#9
10-01-2011, 04:20 PM

(10-01-2011, 03:29 PM)Eschatos link Wrote: [quote author=zaneyard link=topic=5993.msg224938#msg224938 date=1317493059]
[quote author=Eschatos link=topic=5993.msg224935#msg224935 date=1317491478]
[quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.
[/quote]
you need a device to hand out ip addresses unless you want to do that for each device itself
[/quote]

Ok, how would I do that for each device itself?
[/quote]
well it depends on what the device is.
windows you go into control panel and assign an ip address and subnet mask to the adapter that you're connecting to the network



(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
Eschatos
Jack Thompson Fan Club Member


Posts: 4,447
Joined: Mar 2008
#10
10-01-2011, 04:33 PM

(10-01-2011, 04:20 PM)zaneyard link Wrote: [quote author=Eschatos link=topic=5993.msg224947#msg224947 date=1317500982]
[quote author=zaneyard link=topic=5993.msg224938#msg224938 date=1317493059]
[quote author=Eschatos link=topic=5993.msg224935#msg224935 date=1317491478]
[quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.
[/quote]
you need a device to hand out ip addresses unless you want to do that for each device itself
[/quote]

Ok, how would I do that for each device itself?
[/quote]
well it depends on what the device is.
windows you go into control panel and assign an ip address and subnet mask to the adapter that you're connecting to the network


[/quote]

And if I do that for each individual computer the LAN will work?



Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#11
10-01-2011, 04:49 PM

(10-01-2011, 04:33 PM)Eschatos link Wrote: [quote author=zaneyard link=topic=5993.msg224953#msg224953 date=1317504009]
[quote author=Eschatos link=topic=5993.msg224947#msg224947 date=1317500982]
[quote author=zaneyard link=topic=5993.msg224938#msg224938 date=1317493059]
[quote author=Eschatos link=topic=5993.msg224935#msg224935 date=1317491478]
[quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.

The manual is literally 3 pages long and describes none of those things.

Also why would I need a router to create a LAN? I thought that was what the switch itself was for.

edit: the website says that all the ports are Auto-MDIX.
[/quote]
you need a device to hand out ip addresses unless you want to do that for each device itself
[/quote]

Ok, how would I do that for each device itself?
[/quote]
well it depends on what the device is.
windows you go into control panel and assign an ip address and subnet mask to the adapter that you're connecting to the network


[/quote]

And if I do that for each individual computer the LAN will work?
[/quote]
unless you further explain what's wrong, yes.


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
Vandamguy
Guest

 
#12
10-02-2011, 05:49 PM

its just so much easier to just get a router.

if its a one time lan party buy one , then return it the next day.
Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#13
10-02-2011, 06:28 PM

(10-02-2011, 05:49 PM)Vandamguy link Wrote: its just so much easier to just get a router.

if its a one time lan party buy one , then return it the next day.
who doesn't have a router though unless you don't want your network to connect to the internet


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#14
10-02-2011, 09:20 PM

(10-01-2011, 12:21 PM)zaneyard link Wrote: [quote author=HeK link=topic=5993.msg224922#msg224922 date=1317479092]
Keep in mind that not all switches offer uplink ports. Check your documentation.
If you do not have an uplink port on your switch, you must use a cross over cable to connect your residential gateway to your switch.

While checking your switch manual, keep an eye out for 'Auto-MDIX', 'Universal Cable Recognition' or 'Auto Sensing'. If this feature is supported on either device (Dlink offers this feature on nearly every device) then you will not need a crossover as the device itself can automatically cross.
yeah most workgroup switches now have auto sensing i don't remember the last time i've had to use a crossover
[/quote]

CISCO.
Reply
CaffeinePowered
Mad Hatter
*******

Posts: 12,998
Joined: Mar 2008
#15
10-02-2011, 11:23 PM

(10-02-2011, 09:20 PM)HeK link Wrote: CRISCO.


[Image: Crisco%20wikicommons500.jpg]


[Image: caffsighl7.jpg]Â[Image: 1184299259221.gif]
Sig by Joel
Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#16
10-02-2011, 11:30 PM

(10-02-2011, 09:20 PM)HeK link Wrote: DISCO
[Image: 8GPUC.jpg]


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply
Greatbacon
The Most Delicious of All Meats


Posts: 1,980
Joined: Mar 2008
#17
10-02-2011, 11:49 PM

(10-02-2011, 09:20 PM)HeK link Wrote: NABISCO.

[Image: nabisco.gif?w=346&h=346]

Reply
K2
BRB, Posting
*

Posts: 1,373
Joined: May 2008
#18
10-02-2011, 11:52 PM

(10-02-2011, 09:20 PM)HeK link Wrote: SISKO.

[Image: BenSisko.jpg]
Reply
HeK
Rotartsinimda
*******

Posts: 4,183
Joined: Jun 2015
#19
10-02-2011, 11:54 PM

None of the above popular products support auto-sensing.
Reply
zaneyard
Made with Whole Gainz (tm)
***

Posts: 6,930
Joined: Jun 2008
#20
10-03-2011, 12:00 AM

(10-02-2011, 11:54 PM)HeK link Wrote: None of the above popular products support auto-sensing.
my linksys switch has auto sensing i think
i haven't worked with any current cisco equipment so i can't speak for that but i would assume they would.


(04-09-2013, 11:24 PM)Dr. Zaius link Wrote:well i'm not really understanding how it's faster internet. and like google just magically rolls outs this stuff and it's 100 times faster than my internet? why? that doesn't set off any alarms to anyone?

(11-07-2012, 11:15 PM)at0m link Wrote:I MAY OR MAY NOT HAVE OVERINDULGED ON RUM AND COKES AT OUTBACK STEAKHOUSE

THE BARTENDER WAS BRAGGING ABOUT BEING A LEFTY. I SAID I WAS A RIGHTY, BUT THAT I COULD UNDO A BRA WITH JUST MY LEFT HAND. ASKED HER IF THAT COUNTED AS BEING AMBIDEXTROUS. SHE SAID 'NOT REALLY'. tHEN HANDED ME ANOTHER DRINK.

I COUN THAT AS A WIN

CUBA LIBRE
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)